Abbott FreeStyle Lite Manuale Utente Scaricare il pdf (Pagina 7)

Polytel

®

Glucose Meter Accessory (GMA)

8-25207-B June 2009 13

3) Thread the cable through the mesh pocket, in

through the zippered opening and out through a

hole in the mesh near the meter.

4) Plug the cable from the GMA into the side of

the glucose meter and press firmly into place.

NOTE: Connect the GMA ONLY to a

FreeStyle

®

Lite or FreeStyle

®

Freedom

®

Lite meter. Connecting it

to any other device may make your

readings inaccurate or damage one

or both devices.

2) Close and zip the case. The next step is

setting up the receiving station if this has not

already been done.

3.4 Placement of the GMA and

receiving station

Various types of barriers, such as walls, can reduce

the range of wireless devices. Your GMA will work

best if it is in the same room as the receiving

station. (Remember: your receiving station is the

separate box, personal computer, cell phone, or

handheld device.)

Warning: Do not put the GMA on a

metal surface or in a metal box or

enclosure. This may interfere with its

ability to send data.

When the devices are working together correctly,

the red light on the GMA comes on and starts

blinking right after you take a new reading, then

Polytel

®

Glucose Meter Accessory (GMA)

8-25207-B June 2009 14

goes out when the reading is sent. See page 7 to

learn more about the red light.

3.5 How to use your GMA

1. Insert the glucose test strip into the glucose

meter and take your reading as you

normally would. Instructions on using your

FreeStyle

®

meter should have come with

the original box.

2. Remove the test strip as usual.

3. After you remove the test strip:

a. Press the START () button on the

GMA

b. The FreeStyle® meter lights up all of its

display (see below) then transitions to a

simpler display with a single reading.

This shows that it is sending the reading

to the GMA.



1 2 3 4 5 6 7 8 9 10 11 12 13 14

Commenti su questo manuale

Nessun commento